The definitive guide to Wi-Fi standards: From 802.11b/g/n to Wi-Fi 6E

Somewhat surprisingly, not every successive Wi-Fi revision has focused on improving speed and range. Instead, many are designed with specific use-cases in mind. Some have even sacrificed speed or range in favor of the other.

See also: A little history of Bluetooth

These days, devices typically support multiple Wi-Fi standards and allow you to pick the one that works best for your needs.

What is Wi-Fi?

Before we can talk about the different Wi-Fi standards in use today, it’s important to understand how the technology works.

You may have not given it much thought, but Wi-Fi isn’t too far off from traditional wireless communication technologies like TV and radio broadcasts. Both rely on electromagnetic waves, for one, as opposed to mechanical waves like sound that need a medium to travel.

The key difference between Wi-Fi and other wireless standards, however, lies in their transmission frequency. FM and AM radio stations broadcast at low frequencies, typically around 100MHz (megahertz). Wi-Fi, on the other hand, operates exclusively in the gigahertz (GHz) range. Higher frequencies allow more data to be carried at a time, handy for transporting internet data and video streams to various devices around your home. But that also comes with certain drawbacks that we’ll discuss later.

Like any other commonly used technology, Wi-Fi is defined by a set of specifications. More specifically, the IEEE’s 802.11 standard. Notably, the 802 family also standardizes other networking protocols like Ethernet and Bluetooth.

The six years following Wi-Fi’s debut in 1997 saw it go through several incremental revisions. The IEEE’s original 802.11 standard was followed by 802.11b, 802.11a, and finally 802.11g. As you’d expect, each one improved upon the previous in terms of bandwidth, or what we simply refer to as connection speed these days.

Of these three standards, however, only 802.11b and 802.11g made their way to consumer devices. The 802.11a standard operated on the 5GHz frequency, rendering it completely incompatible with existing devices. It did find adoption in enterprise circles but wasn’t common elsewhere due to its high component costs.

Before we discuss the merits of 5GHz Wi-Fi, however, it’s worth circling back to 802.11n first. Released in 2009, it was the final standard that worked to improve the 2.4GHz frequency band. It also added support for MIMO (multiple input, multiple output) — the technology that allows Wi-Fi devices to use more than one antenna for improved data transfer rates.

The 802.11n standard also introduced optional support for the 5GHz frequency band. However, most devices continued to only support 2.4GHz, likely to save on costs from adding a secondary radio.

Despite its age, 802.11n is still the most widely used Wi-Fi standard today, with many budget devices opting for it to keep costs low. Many inexpensive smart home devices like wireless cameras and light bulbs still exclusively use 2.4GHz as well.

To that end, think of 802.11b/g/n as the baseline Wi-Fi standard today. Most routers and devices simply add support for additional standards rather than replace or do away with 2.4GHz altogether. There’s also a practical reason for this, as we’ll discuss in the following section.

802.11ac: Approaching gigabit speeds

After reaching the practical limits of 2.4GHz with 802.11n, researchers proposed a new standard that focused exclusively on 5GHz. Named 802.11ac, it introduced even faster speeds — specifically 866Mb/s per channel. With multiple channels, a router’s total throughput could top out at well over 1Gb/s.

802.11ac also introduced multiple-user MIMO (MU-MIMO), enabling multiple devices to communicate with the router simultaneously. The final advantage came in the form of lower network congestion — the standard accommodated more channels than the former 2.4GHz spectrum. 5GHz devices also don’t have to share the frequency with other wireless standards like Bluetooth, which uses 2.4GHz.

A higher frequency, however, does have a pretty major and noticeable drawback — it cannot handle obstacles very well.

While 2.4GHz signals only suffer minor losses (or attenuation) when passing through obstacles, higher frequencies are far less tolerant of walls and other surfaces. And if your home has brick and concrete walls, the attenuation experienced by 5GHz signals could make it nearly unusable.

In other words, a higher transmission frequency significantly improves bandwidth but has a negative impact on signal strength. This tradeoff is why many routers broadcast 2.4GHz and 5GHz signals simultaneously. Your devices can automatically fall back to the former if you’re far away from the router.

As a side note, this inverse relationship between speed and range also affects millimeter wave (mmWave) 5G signals. Since mmWave operates in the 30 to 300GHz range, the signal strength diminishes if it passes through obstacles. This is why most wireless carriers and smartphone makers are currently sticking to lower frequency 5G bands (sub-6GHz). While these frequencies only offer a small upgrade from LTE, they’re also much more practical.

Read more: What is 5G, and what can we expect from it?

Wi-Fi 6 and Wi-Fi 6E: The new gold standard

Wi-Fi 6, less commonly referred to as 802.11ax, is the newest Wi-Fi standard. The first major change has to do with the Wi-Fi naming convention. After decades of using clunky IEEE titles, 802.11ax simplifies things by calling itself Wi-Fi 6. Previous versions have also been given convenient monikers, with 802.11ac and 802.11n now simply called Wi-Fi 5 and 4 respectively.

As you’d expect, Wi-Fi 6 raises the theoretical bandwidth bar once again, topping out at an impressive 9.6Gb/s. However, that’s not the highlight. Wi-Fi 6 places a heavy emphasis on lowering network congestion through techniques such as MU-MIMO and beamforming.

Up next: The best gaming routers you can buy

In simpler terms, the Wi-Fi 6 standard was designed with dense urban environments in mind. It also better supports emerging applications like home automation, where you might easily have dozens or hundreds of devices connected to a single router.

While the specification was formally finalized in 2019, it’ll be a while longer before most devices support it. Still, adoption has been pretty quick compared to previous standards. There are already several Wi-Fi 6 routers on the market and many mid-range smartphones, laptops, and tablets support the standard as well. Samsung’s Galaxy S10 was the first mainstream Android device with Wi-Fi 6, while the iPhone 11 followed suit later that year.

Wi-Fi 6 originally used the same 2.4 and 5GHz spectrums as previous standards. However, a new revision, nicknamed Wi-Fi 6E, was approved in 2021 that brought about support for the 6GHz frequency band.

See also: A definitive guide to Wi-Fi 6E

Wi-Fi 6E promises even faster real-world speeds and improves device capacity beyond the original 2019 standard. The Samsung Galaxy S21 Ultra was the first smartphone to include Wi-Fi 6E.

Lesser-known Wi-Fi standards

802.11ah

While every single new Wi-Fi standard has attempted to move beyond 2.4GHz, 802.11ah does the exact opposite. It’s the first sub-1GHz Wi-Fi standard and also the only one to prioritize range instead of speed. Its low frequency also allows it to pass through obstacles without experiencing heavy attenuation.

Nicknamed Wi-Fi HaLow, it is intended for IoT applications, where you might need coverage over long distances. You’re unlikely to find mainstream support for it today, but it may gain momentum in coming years.

802.11ad

One of the earliest attempts to move beyond 5GHz for Wi-Fi, 802.11ad was a heavily anticipated standard around 2016. Unlike Wi-Fi 6E’s modest jump to 6GHz, it aimed to operate on the 60GHz frequency band. This ambitious change would allow a theoretical bandwidth of 7Gb/s — nearly 20 times higher than Wi-Fi 4.

As you’d expect, however, the 60GHz frequency band isn’t exactly practical for use over any meaningful amount of distance. In other words, you need a direct line of sight between your transmitter and receiver.

Unsurprisingly then, very few devices adopted 802.11ad and it eventually faded into obscurity. However, the concept of transmitting data over 60GHz lives on for some high bandwidth, low latency applications. The HTC Vive, for example, uses the 802.11ad standard to achieve wireless virtual reality (VR). And even with all this bandwidth, it compresses the stream considerably.

802.11ay

Intended to replace the previous standard, 802.11ay is the latest attempt at 60GHz Wi-Fi. Just like 802.11ad, it requires little to no obstacles in its path, limiting its usefulness to fringe applications like wireless AR/VR and laptop docks. However, it does improve bandwidth over the previous specification, offering a theoretical maximum speed of 20-30Gb/s.

And with that, you’re now up to speed on every Wi-Fi standard in use today! If you’re in the market for a new router, check out our regularly updated list of the best Wi-Fi routers.