In the past, hooking up a set of headphones to a TV was as simple as locating the headphone jack and plugging in your cans. But newer TVs are dropping analog outputs faster than Taylor Swift can debut new albums, and that has left some folks wondering how they can enjoy their TVs and still listen using headphones. But all hope is not lost.
Even if your new TV has no audio outputs and a USB adapter is out of the question, there are plenty of other options for getting TV sound to your headphones. For instance, did you know that you can link up a pair of wireless headphones to most TVs and game systems? Or that you can route audio through the remote controls of popular streaming devices?
From wired to wireless, there are plenty of new hookups to get your headphones and TV simpatico once again. Here’s an in-depth look at all of your options.
Further reading
Wired up
We encourage you to take advantage of the many wireless ways to connect a set of headphones (which we describe below), but if your setup is conducive to a wired pair of headphones — meaning you’ll be sitting close enough to the TV or audio device to conveniently span the distance with a wire — there are still a handful of good options for plugging in.
Adapters
Connecting via an adapter first requires identifying what kind of audio output your TV has. On the back or side of your TV — or wherever your inputs are — there should be some form of audio output connection. In older TVs, there may be a 3.5mm (standard headphone) output, which makes it simple to plug and play.
More commonly, though, older models sport stereo RCA audio jacks, which will require an RCA-to-3.5mm female adapter, like this one from Amazon. This kind of setup is simple and affordable, but not ideal for most scenarios — after all, you probably don’t want a long cable snaking through the middle of your living room.
Newer TVs usually drop analog outputs in favor of a digital optical output. The output looks like a tiny, square-shaped door, often outlined in a bright red light (or fitted with a rubber cap such as the one shown in the image above). For this configuration, you need a digital-to-analog converter (DAC). This will not only allow you to plug in a 3.5mm headphone jack, but also convert the audio output to the correct format for playback in your headphones. Again, you’ll also likely need a headphone extension cable, so you can kick back.
Connecting to a streaming device’s remote control
Another, more convenient option is to plug into the remote control belonging to your streaming device, if available. If you’ve been thinking about getting a streaming device anyway, this is the perfect time to jump in. Streamers such as the Roku Ultra, Roku Streaming Stick 4K+, and the optional game pad controller for the Nvidia’s Shield TV have remote controls with a headphone jack built right in. The remote for TCL’s 6-Series Roku TV features a headphone jack, too.
The only drawback with wiring your headphones this way is that you will only be able to listen to the content that your streaming device is providing. Unless your streaming device is also your TV (like TCL’s and Hisense’s lineup of Roku TVs).
Connecting through external audio devices
Devices like A/V receivers or even external speakers will usually have an accessible connection to plug in a pair of headphones. This is especially handy if you happen to have multiple source devices (e.g., a cable box or antenna, a streaming device, etc.). You’ll need to take a look at your hardware to see if there is a headphone output, or you could use one of the output-adapter setups we mentioned above (such as the RCA or digital optical adapters). Most A/V receivers will have a quarter-inch headphone input in the front, which requires nothing more than a simple adapter if your headphones have a 3.5mm jack.
Wireless connection
For the vast majority of users, wireless headphones and adapters will be much more convenient for a living room setup, even if the connection process is slightly more involved.
TV Bluetooth streaming
TVs are steadily adding Bluetooth streaming as a standard feature. If you have a pair of Bluetooth headphones, you can check to see if your TV supports Bluetooth — this information should be located somewhere in the audio section of the settings. If your TV does support Bluetooth, simply set your headphones to pairing mode, and follow the on-screen instructions to get everything up and running.
One thing to keep in mind here, however, is latency. Many Bluetooth connections introduce a small amount of lag between the TV and the headphones. While this isn’t an issue for music streaming, even nominal lag can create sync issues between the on-screen video and the audio, meaning the actions on the screen will occur a few fractions of a second before you hear the sound.
It can be extremely annoying, especially to audio-minded folk, so you will want to make sure your TV/headphone combination doesn’t induce lag before investing in this route. Models with newer versions of the Bluetooth codec (version 5.0 or higher) may be your best bet, though many factors can induce latency. Check to see if your headphones offer a game mode, as this can help reduce lag, albeit at the cost of pristine sound quality.
Bluetooth through your set-top box
Streaming video devices like the Apple TV 4K and Amazon’s Fire TV Cube also stream audio via Bluetooth. After putting your Bluetooth headphones in pairing mode, just follow the onscreen instructions under the Bluetooth settings for your streaming box and you can begin streaming in no time.
The general rule is that this method will only allow for listening to streaming content from the device you’ve paired to and won’t work as a catch-all solution, that is, unless you’ve got the 2021 version of the Apple TV 4K. That box uses an HDMI eARC connection, letting it act as an audio distribution device for any sound your TV can process.
External Bluetooth adapter
If your TV doesn’t have Bluetooth connectivity and you don’t own a streaming device with Bluetooth, you can outfit your TV with a Bluetooth transmitter. These devices, which hardwire into your TV and beam out a Bluetooth signal, come in several forms, including USB dongles, 3.5mm dongles, and even breakout boxes. If you can find a Bluetooth adapter that supports the audio output port of your TV, you’ll be able to easily pair Bluetooth headphones to it by simply following the pairing instructions that come with each device. Most devices also list latency issues, so check into it before you make a purchase.
Soundbars
Some soundbars, such as Sony’s HT-A5000 or HT-A7000, not only allow you to stream Bluetooth audio from your phone, but will also allow you to stream sound from them via Bluetooth. This is a great solution for those with Bluetooth headphones, as any audio being sent to the bar can be streamed. Bose also offers this on its family of smart soundbars like the Smart Soundbar 900, 700, and 300, but it’s only designed to work with Bose Bluetooth headphones. Again, we caution lag, but more feature-packed soundbars may also adjust for latency, or allow you to do so in the settings. You obviously wouldn’t want to buy a soundbar just for this purpose, but if you’re looking for better audio in general, this could be well worth considering.
RF Headphones
Radio Frequency (RF) headphones from companies like Sennheiser and others connect to a base charging station that is directly wired to a TV or other output device, such as a cable box. Whatever your hardware, you need to match the connection types between the base station and your TV or another source device.
Double-check the connection types (optical, RCA, 3.5mm output, etc.), as it’s possible you need an adapter to make the link. Despite these potential extra steps, RF headphones are excellent for connecting wirelessly, as they often have better range and far less latency (if any) than Bluetooth headphones.
Gaming consoles and PCs
Gaming consoles are another easy way to connect to your TV with regular headphones or, ideally, a dedicated gaming headset. Most consoles are equipped with some form of headphone connectivity. We’ll discuss how to connect to each major console either through wired or wireless connections.
PlayStation 5, PS4, and PS4 Pro
The PlayStation 5, PlayStation 4 and PS4 Pro are probably the easiest consoles for connecting headphones or gaming headsets due to their support of several common connection types and simple setup (though it should be noted that many common Bluetooth headphones may not be supported). The methods for connecting are identical between the versions of the console.
If you’re going the wired route, the PS5’s DualSense and PS4’s DualShock 4 controller both have a 3.5mm jack, just under the PlayStation button and between the thumbsticks. Just plug in your wired headset, and you’re good to go.
If you’re planning to go wireless, the PS5 does not support Bluetooth audio directly at this time, but there’s still a way to connect a set of Bluetooth headphones to the PS5. If you’re using a wired or wireless USB headset and are still rocking a PS4, you can plug the dongle directly into one of the PS4’s USB ports.
Your console should quickly identify the headset and begin playback. Note that some USB headsets are designed for PC and require driver downloads or extra software to use features like surround sound or EQ settings. While you will get basic functionality with these headsets on PS4, it’s best to look for PS4-specific models to get the best experience.
Finally, select supported Bluetooth headphones are also an option on PS4. To pair the headphones, make sure they’re in pairing mode, which is typically accessible via the Pairing or Power button. Then, on the PS4 home screen, select the Settings tab. Scroll down and select Devices, then Bluetooth Devices. Your Bluetooth headphones should show up if they’re in discovery/pairing mode. However, you may have to give the console some time to find them, and only PlayStation-supported headphones will work.
If this doesn’t work, you can also plug the device into the PS4 with a USB cable and allow a few moments for the console to recognize the new headphones.
Xbox Series X, Xbox Series S, and Xbox One
In terms of hardwire headphone connections, both the Xbox Series X and Series S feature 3.5mm headphone connections on the console controllers. Depending on the model year of your Xbox One, the controller may or may not feature this same port.
A wireless connection is a different animal. Xbox consoles do not support Bluetooth, nor do they support the majority of wireless USB headsets. Instead, you will need to seek out Xbox One-specific wireless headsets and then follow the manufacturer’s instructions for connecting them.
Nintendo Switch and Wii U
Nintendo’s most recent console, the hybrid Nintendo Switch, has a few options for connecting 3.5mm and Bluetooth headphones. For wiring directly into the Switch, a headphone jack sits on the upper-left side of the console (Note: This jack only supports audio out, and not mics. To use a mic for voice chat, you need to connect via Nintendo’s voice chat app for smartphones.) This can be used whether the console is docked or undocked — just be mindful of the distance between you and the console when docked so it isn’t accidentally pulled out and dropped.
There are two options for connecting Bluetooth headphones. The first is to purchase a Bluetooth receiver dongle that plugs into the 3.5mm jack and pair your Bluetooth headphones to it. Again, you will want to be careful not to use an adapter that induces latency, so shop carefully and read the reviews.
The second option is to plug in the Bluetooth headphones’ dongle into one of the USB ports on the Switch Dock. This requires you to have updated to the 4.0 Switch firmware or higher (you can double-check your firmware version under the System menu, as well as check for updates), but once you have the proper version, all you need to do is plug in a USB Bluetooth dongle and wait for the headphones to pair.
While this can only be done while the system is docked, a workaround exists for the handheld mode. You will once again need to be running firmware update 4.0 or higher and will need a USB-to-USB 3.0 adapter to plug into the USB 3.0 port under the system. This setup isn’t ideal, but it’s an effective workaround nonetheless.
SteelSeries’ Arctis line of headphones, such as the excellent Arctis 7 or the Arctis 3 Bluetooth, make for prime choices since they feature both 3.5mm and simple Bluetooth connectivity.
On the Wii U, you can plug a pair of headphones into the top of the Wii U Gamepad. Unfortunately, USB headsets and Bluetooth devices are not supported.
PC
The majority of PCs can support almost any type of headphones or headset, no matter if they are wired or wireless. PCs usually have a 3.5mm jack on the tower’s front or back (sometimes they can be on both). Find the small headphones icon right next to the jack, and that will indicate where you can plug your headphones in.
You can also plug a USB headset into any available port on your PC. Generally, you can start using headsets and headphones immediately after plugging them in; however, there are situations where you’ll need to install a driver or a specific type of software to get it officially set up. If you’re not sure exactly what you need to get them working, we recommend checking your manufacturer’s informational guides.
The good news is most PCs are Bluetooth-compatible. You can easily pair your headphones to your computer by switching your Bluetooth device into discovery mode and then turning Bluetooth on via your PC’s audio settings. Your computer should immediately recognize the Bluetooth device, and once you’re all connected, you’re ready to listen to whatever you want.
Editors’ Recommendations