4 Things We Love About WatchOS 8, and 2 That Baffle Us
Apple has released WatchOS 8, the latest software for its Apple Watch smartwatch, and I’ve been trying it out on both the Apple Watch Series 3 and the Apple Watch Series 6. This is a modest update in terms of new features, but there are still plenty of things to try out. Here’s what has impressed so far, plus one feature that hasn’t lived up to expectations, and another that’s not what we want at all.
The two new watch faces are great
There are two new watch faces included with WatchOS 8, Portraits and World Time. Portraits is going to get all the attention, but World Time is the one I’ve stuck with. Portraits suffers because it’s a bit of a pain to set up. You need to choose and add Portrait photos through the Watch app on your phone, rather than from the Watch itself, and if you add more than one photo — 24 in total can be selected — then the Watch face just cycles through them, or you can tap the screen to change the photo.
If you twist the Digital Crown the photo zooms in slightly, but this is not a permanent effect and it reverts to the standard view after a few seconds. I like the choice of layouts for the time, plus the option to add a complication is very welcome. But I find the auto swapping of the photo distracting, and the need to do everything through the Watch app confusing.
Instead, I’ve stuck with the new World Time watch face. It’s a neat spin on the GMT watch face, showing multiple city names on the outer bezel and the local time on the inner bezel. Sunrise and sunset are also shown, and a tap on the screen animates the map which moves to your current location. I like the little details like the red arrow on the outer bezel pointing to your city, and the option to add four different complications, plus a choice of analog or digital time. It’s definitely one of the more attractive of Apple’s busier faces, and a great addition to the existing GMT and Chronograph Pro faces.
Sleep tracking keeps getting better
The big change in the latest software is Respiratory Rate has been added as a metric. It uses the accelerometer and the Watch’s other sensors to work out the number of breaths you take per minute and can be used to inform about certain sleep conditions. However, Apple does point out it’s not intended for medical use. To see the data, you have to visit the Health app on your phone, rather than view it as a complication.
To do this, go to the Health app, then Browse, and Respiratory, where it collects and displays all related data. I used the Apple Watch Series 3 to track sleep and it captured my Respiratory Rate without a problem, and it used about 10% battery over seven hours. The Series 6 used a little more energy and took about 15% overnight for approximately the same sleep time.
Try AssistiveTouch
A new feature designed to increase accessibility is AssistiveTouch, which lets you interact with the Watch without touching the screen. It really shows off Apple’s impressive gesture recognition, which uses the accelerometer and other sensors to recognize movement. It’s activated under the Accessibility menu in the Watch app on your phone, and uses pinches and fist clenches to move through the Watch’s menu.
This is AssistiveTouch in #watchOS8, and accessibility feature that will help more people interact with the smartwatch. It takes a few minutes to learn the gestures, but once you have it's incredibly accurate, and my exaggerated movements here aren't required to make it work. pic.twitter.com/Bfq0E6dp06
— Andy Boxall (@AndyBoxall) September 21, 2021
Setting it up takes just a moment, and you need a few minutes to learn the gestures. Once you have it’s easy to move fluidly through the menus. What’s most impressive is the accuracy, as the Watch obviously doesn’t use a camera to see your movements. It doesn’t seem to get it wrong at all, and if it’s unsure it just ignores the input until you do it again.
It’s a really smart, technically impressive, and I imagine extremely helpful mode for many people to enjoy the Apple Watch may not have so easily done so before.
Install WatchOS 8 on your Series 3
I hadn’t used the Watch Series 3 for a few months and had to perform one interim WatchOS 7 update before moving on to WatchOS 8. Both went without a hitch without a need to free up additional space, but did take several hours to complete, so patience is needed. Don’t start the process if you’re not in a position to put the Watch on its charger either.
Patience is needed during startup after updating too, which takes an age on the Series 3, but once going the software is immediately more spritely than WatchOS 7, although some of the animations do still stutter, it’s never in a way that affects use. Updating the Watch Series 3 to WatchOS 8 has noticeably improved the speed of the smartwatch, so it’s worth doing for that alone.
Set up a Separation Alert, if you can
This is probably the most helpful addition to the Find My toolkit, as it reminds you if you leave your iPhone behind somewhere, but frustratingly I could not get it to work on my iPhone 12 Pro and Apple Watch Series 6. It’s activated in the Find My app on your iPhone, where you tap on the device you want to keep track of, and flick the switch under the Notify When Left Behind option. You can add basic locations as exemptions if you prefer not to be alerted when you go outside without your phone at home.
Although the settings seemed to be correct and all the relevant location and notification alerts active, my Apple Watch did not tell me when I was separated from my iPhone. I left the phone in my car and walked a considerable distance away — the car became a speck on the horizon — but my Watch stayed silent. I tried again and again, checking different options as I went, but alas, if I had left my iPhone behind somewhere, I wouldn’t have known.
It’s possible there is a problem with some settings as I have a lot of devices registered to Find My, and I’ve seen other reports stating the feature works, so it may work without a problem for you. It’s definitely worth trying, and I hope you have better luck than me.
Don’t talk to me Siri
Not being able to get the Separation Alert working was annoying, but not anywhere near as much as the new Voice Feedback feature in WatchOS 8’s Workout app. The Apple Watch will verbally announce workout milestones while it’s tracking, including time elapsed, distance, and other details. It does this either through connected Bluetooth headphones, or the Watch’s speaker.
I understand the feature can be helpful for cyclists, but it really doesn’t need to be active by default. Out on my walks, those around me don’t need to know any of the details Siri shouts out. If that wasn’t annoying enough, it seems to be an on-or-off feature at the moment. It can be deactivated in the Watch app on your phone, and because it’s a global setting, there’s no way to only have it active for cycling, and not for walking for example.
There are uses for this kind of feature, but I don’t believe it’s for everyone, and certainly not something anyone will want all of the time.
A modest update
WatchOS 8 is a modest update and doesn’t bring with it any major features that will change the way the Apple Watch works for everyone, but features like AssistiveTouch and Respiratory Rate may really alter the way the Apple Watch is used for some, and even potentially open it up for people who haven’t been able to use it at all until now.
It’s also great to find WatchOS 8 working so well on the Apple Watch Series 3, and being easy to install as well, giving the aging smartwatch another year of life. We don’t recommend you go out and buy a Series 3, and suggest the Apple Watch SE instead, but if you already own one the update should hold you over until the Apple Watch Series 8 next year.
WatchOS 8 is available to download now, just ensure you have updated your iPhone to iOS 15 first as otherwise, the update won’t show up.
Editors’ Recommendations
